Blog category
Tightening torques
09/06/2024
Torque Specifications for Standard Bolts and Nuts Hexagon Bolt (7T) and general Nut information: 1. M6 x 1.0mm •87 – 104 in-lb (9.8 – 11.8 N m, 1.0 – 1.2 kgf m) 2. M8 x 1.25mm •200 – 251 in-lb (22.6 – 28.4 N m,...
22/04/2024
Iseki aanhaalmomenten Over het algemeen is een belangrijke regel dat de kopbouten eerst voorzien moeten worden van olie, waarop vervolgens met de momentsleutel de juiste NM gemeten kan worden. Specifications TRACTORS GC2300 / GC2310 / ST22A / GC2400 / GC2410 1523 /ST24A / MT225B GC2600...
29/12/2023
If you have questions about the KE70, KE75, K2B and other K2A engines, you’ve come to the right place! Since we receive many requests regarding: We are happy to share information about the engines. The engines have been used in various machines and also in...
03/08/2023
Kubota tightening torques of head bolts and other items General information on the tightening torques of all Kubota engines as an example the head bolts etc. An important rule is that the head bolts must first be oiled, on which the correct NM can then...
03/08/2023
Kubota tightening torques General information on the tightening torques of all Kubota engines as an example the head bolts etc. An important rule is that the head bolts must first be oiled, on which the correct NM can then be measured with the torque wrench....
03/08/2023
Kubota tightening torques General information on the tightening torques of all Kubota engines as an example the head bolts etc. An important rule is that the head bolts must first be oiled, on which the correct NM can then be measured with the torque wrench....
30/01/2023
Kubota tightening torques General information on the tightening torques of all Kubota engines. An important rule is that the head bolts must first be oiled, on which the correct NM can then be measured with the torque wrench. Tuning of all 05 engines:...
09/12/2022
Toyosha S107 | S88 | S100 Hinomoto E14D, E15, E15D, E150, E152, E152, E180, E182, E184, (two versions – E18, E18D with Toyosa S107), Massey Ferguson 205, Gutbrod Head bolt torque: 64.9 to 79.7 ft-lbs (88-108 N-m) connecting rod cap torque: 36.1 to 42.8 ft...
09/10/2022
Below are the tightening torques for all two, three and four cylinder engines known from the Mitsubishi K4, K3 and L2 and L3 series. We have these data from official manuals of the respective engines. Where possible, we have added the tightening torque sequence. Translated...
